Posts tagged "Gotek floppy emulator"
The Gotek is a true gift to nearly every retro computer out there. At last, you can load disks without worrying about mould!
-
Tandy 1000SX is cleared for flight
Now that the Tandy 1000SX finally works, it’s time to set it up for something useful. By which I mean playing Sopwith off of a Gotek floppy drive emulator.
-
That name again is Mr.PC
Get ready to step into the cyberpunk future of the mid-late 1980s, and don’t forget to bring your boxed wine. NEC pulled out all the stops on this, their final PC-6001 computer. I have to pull out even more stops to get the disk drive to work.
-
Dual Goteks in the PC-8801mkIISR at last
In my previous entry, I found out that my old IBM PC “DOS” floppy adapter was not sufficient when trying to read from two drives at once. Somehow, they confused the floppy controller enough that nothing could be read from the second drive.
-
Attempting dual Goteks in the PC-8801mkIISR
I got another couple of Gotek floppy emulators from China, and now the SR has dual floppy drives. Unfortunately, I can’t use them both at the same time.
-
PC-8801mkIISR opening and Gotek setup
I’ve been wanting to get back to the SR for quite some time. I figured the Gotek adapter PCB and the HxC-flashed Gotek would be a direct drop-in to the new machine, and I was right.
-
Mini-updates 2 - A501 battery, PC-98 Gotek update, SparcStation 1+ debugging
I’ve been up to a bunch of little projects while waiting on parts and time for the big jobs, so here is another mini-update on three of those projects.
-
PC98 - New floppy board, sound 'fixed,' more testing
Now that the PC98 can load a game off a flash drive, there’s a lot more parts of it I can test. Today, I spent a few minutes putting together a new revision of the floppy board and inspecting the computer.
-
Floppy adapter board works for the PC98!
After I designed the first version of my PC88 floppy board, I thought it would be fun to put one together for the PC98 as well. Why do I need an adapter for a computer that already has 3.5” floppy drives? The PC9821AP2 I own has a 26-pin floppy drive connector, like a mid-90s laptop, and most standard IBM PC style floppy drives have 34.
-
Revenge of the PC-8801mkII floppy adapter board
In the last entry, I found myself with a working adapter board to allow a 3.5” floppy drive (like a Gotek) to work with the NEC PC8801mkII. This liberated me from having to source, organize and maintain 5.25” floppy disks, and opens a large library of software for this computer without having to hunt through the used market. However, like all good things, there were a lot of bugs with the old adapter.
-
PC-8801mkII floppy adapter board
I wanted to get a Gotek working on my PC88, and after seeing that there were a lot of Japanese hobbyists who had managed to get an HxC floppy emulator working, decided it must be possible - even if not simple.
-
Gotek with FlashFloppy on the Amiga 2500
I recently flashed an eBay Gotek floppy emulator for use in my Amiga 2500 with the FlashFloppy firmware (based on the phenomenal work of HxC).