Posts tagged "NEC PC-6001"
The first model of the NEC PC-6001 series, a budget Z80-based home computer with 16K of RAM and a 6847 VDP.
A Backup Papicom
When you love a computer, sometimes you have to buy a second one of that computer, especially if it’s cheap. My justification? I wanted a good sacrificial test platform on which to do a bunch of internal PC-6001 mods, and I didn’t want to worry about frying my beloved first PC-6001. So, of course what I did was: pick up one that’s in better condition than my “good” one.
Giving my PC-6001 a LIFT
Most software for the NEC PC-6001 was sold on tape cassettes. Tapes are great, but they require a lot of patience. I do strongly prefer the modern conveniences of floppy disk and ROM cartridge. What do you mean those aren’t “modern?”
Hearing the PC-6001 out
When I first set up the PC-6001, I had to bring it back to life by replacing the shorted tantalum capacitors on the motherboard’s power rails. It’s such a great little machine! After some more testing, however, it became obvious that I was getting no sound out of the poor little thing.
Cleaning the keyboard on the PC-6001
When I first fixed the PC-6001, there were a few sticky keys on the keyboard. “H,” Left Shift, and - most importantly - Return were all bad to a certain extent. I could limp along with Ctrl-M for a little while to replace Return, but it was pretty awkward. How hard can it be to clean the keyboard?
The circle of life - an NEC PC-6001 arrives, breaks, is fixed
Sure, I’ve got NEC PC-88s, I’ve got NEC PC-98s, but didn’t NEC make anything that was a little friendlier to the home user? By now, you should know better than to doubt our friends at the Electric Company. The NEC PC-6001 has a thriving homebrew scene around it in Japan to this very day, and is still fondly remembered. Let’s rip one open and stuff it with hot molten lead.