Posts tagged "Soggy-1000 (homemade SG-1000)"

The Soggy-1000 started out as a clone of the Sega SG-1000 game console. The goal was to create an inexpensive platform for preservation and enjoyment of Sega SC-3000 computer software, but it has grown into something else. You can find out more about it on the Soggy-1000 GitHub project page.

The Soggy-1000 turns a page

For version 3 of the Soggy-1000 SG-1000 clone, I wanted to make it more useful as a general-purpose computer. Building a new keyboard is going to cost a fortune in parts, so it’s fiscally prudent to find more reasons to use said keyboard. There are only so many SG-1000 games out there, the SC-3000 software library is kind of small, and I was using only 2k of the 32k of RAM that I had on the board. These are all problems that can be solved with a suitably large application of hubris.

Soaking it in with the SK-1100 Keyboard

If you’ve been following the Soggy-1000, my clone of the Sega SG-1000, then you know what it needs most of all is a keyboard. The original Sega SK-1100 keyboard is hard to find, but I still managed to luck out and get one at auction. Let’s plug it in and find out if it still works.

Soggy-1000 ][

Once I got the Soggy-1000 playing SG-1000 cartridges, the next thing to do was to extend it. In this phase of the project, we’ll take that leap from “interesting” to “slightly ridiculous,” by adding the feature I’m most excited about – at least until I get excited about a different one – the SK-1100 keyboard connector.

SG-1000 Ways To Leave Your Original

The SG-1000, being Sega’s first home console, has appreciated quite a bit over the years. Its price is now faintly ridiculous, especially when you consider its successor, the relatively inexpensive Mark III. Luckily for us, this console is made out of off-the-shelf components, virtually all of which are also found in the ColecoVision. If only we knew someone who’d cloned the ColecoVision…

More tags